Technikai információ

Wireless



    Wireless mode



    802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)



    Wi-Fi security



    WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)



    SSID/ESSID



    ESSID stealth mode



    Wi-Fi users



    Up to 50 simultaneous connections



    Wireless Connectivity Features



    Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)



    Wireless MAC filter



    Whitelist, blacklist



    Wireless QR code generator



    Once scanned, a user will automatically enter your network without needing to input login information.



Ethernet



    WAN



    1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover



    LAN



    1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover



Network



    Routing



    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing



    Network protocols



    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN



    VoIP passthrough support



    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets



    Connection monitoring



    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection



    Firewall



    Port forward, traffic rules, custom rules, TTL target customisation



    Firewall status page



    View all your Firewall statistics, rules, and rule counters



    Ports management



    View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on



    Network topology



    Visual representation of your network, showing which devices are connected to which other devices



    DHCP



    Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards



    QoS / Smart Queue Management (SQM)



    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e



    DDNS



    Supported >25 service providers, others can be configured manually



    DNS over HTTPS



    DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS



    Network backup



    Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover



    Load balancing



    Balance Internet traffic over multiple WAN connections



    Hotspot



    Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes



    SSHFS



    Possibility to mount remote file system via SSH protocol



    Traffic Management



    Real-time monitoring, wireless signal charts, traffic usage history



Security



    Authentication



    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator



    Firewall



    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T



    Attack prevention



    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)



    VLAN



    Port and tag-based VLAN separation



    WEB filter



    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only



    Access control



    Flexible access control of SSH, Web interface, CLI and Telnet



    SSL certificate generation



    Let's encrypt support



VPN



    OpenVPN



    Multiple clients and a server can run simultaneously, 27 encryption methods



    OpenVPN Encryption



    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,



    BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256



    IPsec



    XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)



    GRE



    GRE tunnel, GRE tunnel over IPsec support



    PPTP, L2TP



    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support



    Stunnel



    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code



    DMVPN



    Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support



    SSTP



    SSTP client instance support



    ZeroTier



    ZeroTier VPN client support



    WireGuard



    WireGuard VPN client and server support



    Tinc



    Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.



OPC UA



    Supported modes



    Client, Server



    Supported connection types



    TCP



MODBUS



    Supported modes



    Server, Client



    Supported connection types



    TCP



    Custom registers



    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality



    Supported data formats



    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII



DATA TO SERVER



    Protocol



    HTTP(S), MQTT, Azure MQTT



    Data to server



    Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature



MQTT Gateway



    Modbus MQTT Gateway



    Allows sending commands and receiving data from MODBUS Server through MQTT broker



DNP3



    Supported modes



    Station, Outstation



    Supported connection



    TCP



DLMS



    DLMS Support



    DLMS - standard protocol for utility meter data exchange



    Supported modes



    Client



    Supported connection types



    TCP



API



    Teltonika Networks Web API (beta) support



    Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com



Monitoring & Management



    WEB UI



    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status



    FOTA



    Firmware update from server, automatic notification



    SSH



    SSH (v1, v2)



    Email



    Receive email message status alerts of various services



    TR-069



    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem



    MQTT



    MQTT Broker, MQTT publisher



    SNMP



    SNMP (v1, v2, v3), SNMP Trap, Brute force protection



    JSON-RPC



    Management API over HTTP/HTTPS



    RMS



    Teltonika Remote Management System (RMS)



IoT Platforms



    Cumulocity - Cloud of Things



    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions



    Azure IoT Hub



    Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs



System Characteristics



    CPU



    Mediatek, 580 MHz, MIPS 24KEc



    RAM



    128 MB, DDR2



    FLASH storage



    16 MB serial NOR flash



Firmware / Configuration



    WEB UI



    Update FW from file, check FW on server, configuration profiles, configuration backup



    FOTA



    Update FW



    RMS



    Update FW/configuration for multiple devices at once



    Keep settings



    Update FW without losing current configuration



    Factory settings reset



    A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration



FIRMWARE CUSTOMISATION



    Operating system



    RutOS (OpenWrt based Linux OS)



    Supported languages



    Busybox shell, Lua, C, C++



    Development tools



    SDK package with build environment provided



    GPL customization



    You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs



    Package Manager



    The Package Manager is a service used to install additional software on the device



Power



    Connector



    3-pos plugable terminal block



    Input voltage range



    9-30 VDC, reverse polarity protection, surge protection >31 VDC 10us max



    PoE (passive)



    Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC



    Power consumption



    Idle: < 1 W / Max: < 2 W



Physical Interfaces



    Ethernet



    2 x RJ45 ports, 10/100 Mbps



    Status LEDs



    1 x WAN type LED, 1 x LAN type LED, 1 x Power LED



    Power



    1 x 3-pin power connector



    Antennas



    1 x RP-SMA for Wi-Fi



    Reset



    Reboot/User default reset/Factory reset button



    Other

     



    1 x Grounding screw



Physical Specification



    Casing material



    Aluminium housing



    Dimensions (W x H x D)



    113.10 x 25 x 68.6 mm



    Weight



    142.3 g



    Mounting options



    Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)



Operating Environment



    Operating temperature



    -40 °C to 75 °C



    Operating humidity



    10% to 90% non-condensing



    Ingress Protection Rating



    IP30

Képek a termékről

Garanciális információ

A termék csomagolása